How NaDCC Works
NaDCC, also known as sodium dichloroisocyanurate or sodium dichloro-s-triazinetrione is an organic chlorine donor and fast acting, powerful biocide. NaDCC is not a hypochlorite (bleach). The NaDCC retains it’s killing power due to a 50/50 chemical equilbrium that continues to generate hypochlorous acid as the chlorine is being used up in the process. This means that it is not inactivated by dirt/cloths/organic matter as easily as bleach.
Sodium dichloro-s-triazinetrione in water generates HOCl which has a similar chemical structure to water (H2O). These factors enable it to penetrated the cell wall in a similar way to water. Once inside the cell it…destroys the nucleus of the cell and completes the disinfection process.
Disinfection of Hard, Non-Porous Surfaces:
Paerolyte Tabs when used as directed is formulated to disinfect washable hard, non- porous surfaces such as walls, ceilings and equipment in poultry and other livestock facility’s including meat and poultry processing plants.
To Disinfect Hard, Non-Pourous Surfaces:
Add one 13.1g Paerolyte Tabs Tablet per gallon of water to create a 1076ppm solution. Spray all surfaces, use as directed per label instructions. Contact time is 10 minutes.
Water Disinfection:
Paerolyte Tabs when used as directed is formulated for poultry, swine, cattle and livestock drinking water disinfection.
Preset Medicator Process:
1. Add one 13.1g tablet to 4 gallons of water to create a 269ppm available chlorine solution.
2. Dose using a preset medicator that injects at 1:128 (2ppm) or 1:256 (1ppm).
3. Monitor FAC (free available chlorine) at the end of your waterline to ensure proper dosing by maintaining a minimum of .5 ppm of FAC.
Peristalic Pump Injector Process:
1. Peristalic Pump Injector Process: Add (5) 13.1g tablets to one gallon of water to create a 5382ppm available chlorine injectable solution.
2. Dose at 1:5000 for a 1ppm final dilution (maintenance) or 1:1000 for a 5ppm final dilution (initial use).
3. Monitor FAC (free available chlorine) at the end of your waterline to ensure proper dosing maintaining a minimum level of .5 ppm of FAC.
